1. Available products specification
| Specification | JIS G 3302 |
|---|---|
| SGCC | |
| Thickness | 0.19 mm. – 3.0 mm. |
| Width | Min. 9 mm. Max. 1219 mm. |
| Length | Length from 300 mm. – 6000 mm. and special length available upon request |
2. Meterial standard
– Chemical composition
| Standard Designation | Chemical Composition (%) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| C Max. |
Si Max. |
Mn Max. |
P Max. |
S Max. |
Ni | Cr | Mo | N | |
| SGCC | 0.12 | – | 0.50 | 0.040 | 0.045 | – | – | – | – |
– Mechanical property
| Standard Designation | Mechanical properties | Reference | |||||
|---|---|---|---|---|---|---|---|
| Tensile Test | Hardness Test | ||||||
| Yield Strength (N/mm2) Min |
Tensile Strength (N/mm2) Min |
Elongation (%) Min |
HV Max |
HRB Max |
HB Max |
||
| SGCC | Bending Test 180 No Crack | JIS G 3302 | |||||
| Remark : | Tensile test method shall comply with JIS Z 2241 | ||||||
| Tensile test specimen shall conform to JIS Z 2201 No. 52201 No.5 | |||||||
– Camber, flatness, opposite angle, burr
| Process | Width | Tolerance Max. | |
|---|---|---|---|
| Camber | ALL | 8 – 80 mm. | 8.0 mm. / 2 m. |
| 81 – 1219 mm. | 4.0 mm. / 2 m. | ||
| Flatness | Shear (A,S,D) | 8 – 80 mm. | no limitation |
| 81 – 1000 mm. | 12.0 mm | ||
| 1001 – 1500 mm. | 15.0 mm. | ||
| Opposite Anlge | Shear (A,S,D) | 4′ x 8′ | 1.0 mm. |
| 5′ x 10′ | 1.5 mm. | ||
| (200-1000) W x (200-1200)L | 0.5 mm. | ||
| Other | 1.0 mm. | ||
| Burr | ALL | – | 0.03 mm. |
3. Classification of Sheet & Coil Products
| Classification | Ratio of Conforming Quantiry | Quality of Sheet | Remark |
|---|---|---|---|
| Sheet | 100% | According to boundary sample | F or A grade customer |
| 97% | According to boundary sample | F or A grade customer | |
| Good area > 97% | According to boundary sample | – |